1. Make certain that all loose gear such as plates, galley utensils,
personal items such as cash and valuables, clothing, sporting goods,
decor, curtains or seat cushions and any other items that are not part
of the vessel are stowed and secured or removed from the vessel.
2. Empty all water and holding tanks. Boats should not be transported
with fuel or water in the tanks so drain both. Remove any drain plugs
from the hull. There should not be any water in the bilge while it is
being transported.
3. Wooden boats can be expected to dry out. A coat of linseed oil
will help.
4. Disconnect battery cables or turn off battery switch and secure
batteries.
5. Remove anchors from the deck.
6. Remove any device or fixture that extends beyond the hull of the
vessel such as antennas, radar, compasses or depth sounders. These devices
should be secured inside the vessel for shipping.
7. When moving a sailboat, you must remove all types of rigging, winches,
lights, spreaders and wind indicators prior to transport. Carpet should
be provided for the mast at the points of tie down. Expect some chafing
at these points. If the mast is painted, it is almost impossible to
keep the paint from chafing. Christine Transport cannot assume liability
for damages due to scratches and abrasions that may occur on the mast
or damage to the riggings and lights left on the mast
8. Secure items on your boat as if you were about to sail into the
worst weather. Life lines, stanchions, bow and stern pulpits should
be removed if they render the boat over an acceptable height, generally